GT-OEO series products are high-performance 10G optical signals Repeaters, realize the optical signal equilibrium amplification, clock extraction and plastic regeneration, extended optical signal transmission distance greatly.
Using Optical - Electrical - Optical wavelength conversion and WDM (DWDM/CWDM) technology, cooperate WDM device can achieve optical signals transmit in a single fiber by single or multiple way over a long distance.
Connection between fiber to fiber 10Gbps Ethernet equipment function as fiber mode converter ,or as fiber repeater for long distance transmission.
Media converter for network backbone(SAN, LAN, MAN).
Can be applied in Telecommunication room, R&D laboratory, Data center, and etc.
1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.

Features

Support 2U Rack (16 channel) and independent use
support network management
Support a WEB form and simple network management protocol SNMP mode. A WEB management can let user to allows monitor and manage the card status easily; Support SNMP unified network management platform
support ITUT prescribed DWDM/CWDM wavelength transmission rate:9.95 Gb/s - 11.35 Gb/s
Transparent Transport for data, less delay
SFP module (Diagnostic Monitoring with), can detect light power change
support Loopback test function
support hot plugging
state indicator light is complete
Easy installation
3R function (balanced amplification, Timing Clock Obtaining , Shapping and regeneration), good dispersion management function, data transmission rippon at low.

Parameter and specifications

· Performance Data	· Technical Indexes
· Equipment function	· 3R Repeater
· Transmission Speed	· 10Gb/s ( 9.95Gb/s-11.35Gb/s )
· Protocols	· IEEE802.3ae (10Gbase-R/LRM)
· Access Type	· 10G LAN/ 10G WAN
· Interface Type	· A Type: SFP+ To/From SFP+ · B Type: SFP+ To/From XFP · C Type: XFP To/From XFP
· Transmission Distance	· SFP+ module: Up to 40Km · XFP module: Up to 80Km
· Maximum Packet · Forwarding Rate	· 14,880,950/S
· Network management · information:	· • Card type information · • SFP+ or XFP fiber module detection · • SFP+ or XFP fiber module DMI function ( Temperature , Voltage , Optical power ) · • Link status detector · • Enable/Disabled Loopback test function · • Enable/Disable PRBS Generator and checker function · • Rate select ( 10Gbase-Lan or Wan ) · • Remote card's status monitor ( only in pairs )
· power requirement	· Rack-mountable : AC 85 ～ 220V OR DC -48V · Standalone: AC 220V OR -48V · Power consumption: ≤4W
· Work Environment	· Operating Temp: 0~ 50 ℃ · Storage Temp: -10~ 70 ℃ · Humidity: 5%~90% ( non-condensing )
· Dimension	· Card : 11.5mm ( W ) × 78mm ( D ) · Standalone : 156mm ( W ) × 128mm ( D ) × 32mm ( H )

Typical Network Diagram and Application

SDH/SONET STM-64/OC-192,10G fiber channel,10G Ethernet, 10G CWDM/DWDM

Product Tags:

wireless n repeater installation

wireless n repeater installieren

Inquiry Cart 0