4 Port Fiberhome IBAS 110A , ESD2 Ethernet Switch Fiber Network Interface Card Supports VLAN Setting
Overview
The card can be divided into two types, electrical interface type and optical
interface type.
- The optical interface type of the ESD2 card has four Ethernet optical interfaces,
- TX1 / RX1 to TX4 / RX4.
- The electrical interface type of the ESD2 card has four Ethernet electrical
- interfaces, CH1 to CH4.
Features
The main functions of the ESD2 card include
- It provides four FE optical / electrical interfaces (LAN port) externally and eight
- FE full-duplex data interfaces (WAN port) internally.
- It provides four working modes: 10Mbit/s half-duplex, 10Mbit/s full-duplex,
- 100Mbit/s half-duplex, 100Mbit/s full-duplex. Any specific working mode can
- be chosen through the interface auto-negotiation and switched according to
- specified requirements.
- It supports GFP or WRI encapsulation with a minimum cross-connect
- granularity of VC-12.
- It supports backpressure flow control under half-duplex mode.
- It supports IEEE 802.3x flow control under full-duplex mode.
- It supports VLAN setting based on IEEE802.1Q and interfaces.
- It supports bandwidth limit and QoS functions.
- It performs port trunking functions.
- It supports remote online upgrading of FPGA and BCT software.
