Guangdong Global Telecommunication Technology Co., Ltd.
Guangdong Global Telecommunication Technology Co., Ltd.
Add to Cart
Mix GE Ethernet Interface Card 60W Virtual Cascade GFP-F Mode Function Path Overhead Processing
The XGI2 card Supports the access and processing of ten GE optical / electrical interface services and one 10GE optical interface service..
Provides ten GE optical / electrical interfaces and one 10GE optical interface. Users can select to use the GE optical module or GE electrical module as needed.
Supports the Layer 2 switching function to enable the cross-connect and longhaul transmission of the GE and 10GE services on the ASON platform.
Supports the virtual cascade and GFP-F mode.
Supports the AVCAT and LCAS functions.
Supports pointer explanation and path overhead processing.
Supports fault management, counts and analyzes the alarms that occur in the card, and reports the analysis result.
Performs the Layer 2 and Layer 3 switching functions such as dynamic address learning, VLAN, broadcast packet suppression and convergence.
Supports QoS and QinQ.
Supports hot insertion at the optical / electrical interface.
Supports the seamless switch between the active and standby clock and crossconnect cards.
Supports the remote software upgrade.
The working principle of theXGI2 card is shown as below.
The 10GE Optical Interface Specifications of the XGI2 Card,
| Item | Specification | |||
| Optical interface type | 10GBASE-SR | 10GBASE-LR | 10GBASE-ER | |
Transmission distance (km) | 0.3 | 10 | 40 | 80 |
| Tx optical power (dBm) | -7 to -1 | -6 to -1 | 0 to 4 | 0 to 4 |
| Central wavelength (nm) | 840 to 860 | 1290 to 1330 | 1530 to 1565 | 1530 to 1565 |
Overload optical power (dBm) | -1 | 0.5 | -9 | -7 |
Receiving sensitivity (dBm) | -11 | -14 | -14 | -24 |
| Extinction ratio (dB) | 6 | 6 | 9 | 9 |
The GE Optical Interface Specifications of the XGI2 Card,
| Item | Specification | ||||
| Optical interface type | 1000BASE- SX | 1000BASE-LX | 1000BASE- VX | 1000BASE- ZX1 | 1000BASE- ZX2 |
| Target distance (km) | 0.55 | 10 | 40 | 80 | 100 |
| Source type | MLM | MLM | MLM | SLM | SLM |
Mean launched optical power (dBm) | -9.5 to 0 | -8 to -3 | -5 to 0 | -2 to 5 | -2 to 5 |
| Central wavelength (nm) | 770 to 860 | 1270 to 1355 | 1270 to 1350 | 1500 to 1580 | 1500 to 1580 |
| Overload optical power (dBm) | 0 | -3 | -3 | -3 | -9 |
| Receiving sensitivity (dBm) | -17 | -20 | -23 | -23 | -31 |
| Minimum extinction ratio (dB) | 9 | 9 | 9 | 9 | 9 |
The GE Electrical Interface Specifications of the XGI2 Card,
| Item | Specification |
| Module type | 10/100/1000Base-T |
| Interface type | RJ-45 |
| Interface rate | 10/100/1000Mbit/s auto negotiation |
| Transmission media | CAT-5 twisted pair |
| Standard applied | IEEE Std 802.3TM-2002 |
| Transmission distance | 100m |
| Working temperature range | 0℃ to 70℃ |
| Item | Specification |
| Weight (kg) | 1 |
| Panel dimensions: H×W×D (mm) | 368×25×210 |
| Item | Specification |
| Power consumption (W) | 60 |